» Publishers, Monetize your RSS feeds with FeedShow: More infos (Show/Hide Ads)
|
Max HS90 2-3/8″ to 3-1/2″ Full Round Head Stick Nailer, 170 - 320 PSI |
|
| -Extremely powerful-Short magazine and compact body-Light weight only 5.9 lbs-Unique tangle free swivel fitting. Easy jam clearance door. Comfortable rubber grip | |
| -Anti-dry fire mechanism-Easy side loading system-High capacity of pin length without adjustment on tool-Pin indicator on the magazine-Belt hook-Comfortable rubber grip-Double Trigger for safety | |
|
Max CN550S 2″ Siding and Decking Coil Nailer, 70 - 100 PSI, 200 - 400 Nails |
|
| -Drives from 1 x 0.062 to 2 x 0.098 flat wire welded nails and flat plastic sheet collated nails-Well balanced with the lightest weight in its class-Anti-double fire mechanism-Accepts both flat wire welded and plastic sheet collated nail-Dial adjustable depth control-Multi-directional exhaust cover-Maintenance free end cap filter | |
|
Max HN75 1-1/4″ Coil Framing Nailer, 170 - 320 PSI, 300 Nails |
|
| -Powered by 400psi high pressure system-Anti-double fire mechanism-New design recoil reduced valve-Trigger Lock for safetyDrives from 1-1/4 up to 2-1/2 flat plastic sheet collated nails | |
|
Max HN65 2-1/2″ Super Siding Nailer, 170 - 320 PSI, 400 Nails |
|
| -Drives from 1-1/2 up to 2-1/2 flat wire welded nails-Also drives from 1-1/4 up to 2-1/2 flat plastic sheet collated nails-Anti-double fire mechanism | |
|
Max HN65J 2-1/2″ High Press Coil Nailer, 170-320 PSI, 100 Nails |
|
| The Max HN65J is a 2-1/2″ High Press Coil Nailer. The nailer shoots 1-1/2″ x 0.131″ up to 2-1/2″ x 0.162″ flat plastic sheet collated nails with a load capacity of 100 nails. The 100 nail magazine increases productivity by reducing the need to reload. It has a contact trip trigger and a trigger lockout switch for safety. | |
|
Max CNV400A 2-1/2″ - 5″ Coil Multi-Impact Nailer, 70 - 120 PSI, 50 Nails/Coil |
|
| -Drives up to 125 mm nails with minimal recoil due to a built-in shock absorber-Multi-impact mechanism provides sufficient power to drive up to 125 mm nails-Driving depth adjustment lever. Both toe nailing and flush drive are easily selectable-360 flexible tailpiece. No more fighting with the hose | |
|
Max CN601J 1-1/2″ - 2-1/2″ Positive Placement Coil Framing Nailer, 70 - 100 PSI, 100 Nails |
|
| The Max CN601J is a 1-1/2 to 2-1/2 Positive Placement Coil Nailer. The Max CN601J is very unique coil nailer designed for hardware fastening. The point of the nail is appeared at the nose tip and it is easy to locate the nail into the hole of metal connectors. The nailer pulls a nail from collation and holds firmly in nose. This allows to find the hole of the metal connector easily with the nail. After the first nail is driven the second nail is fed to the nose muzzle automatically and ready to drive. | |
| -Nail length regulator automatically sets nails to desired pin length-Used to install window frames, door frames, molding and more-Single sequential safety trip mechanism-Depth adjustment for flush or below level | |
|
DeWalt D55141FNBN Heavy-Duty Finish Nailer/Brad Nailer/Compressor Combo Kit, 2200 RPM, 0.6 HP |
|
| The DeWalt D55141FNBN is a Heavy-Duty Finish Nailer/Brad Nailer/Compressor Combo Kit. The compressor has 2.0 SCFM delivered @90 PSI pump, 2.0 gallon tank and 150 max PSI which enables more nails to be fired and provides quicker recovery. Ball valve drain allows for quick and thorough tank draining. It features durable oil free pump provides extended maintenance-free operation. Its low 10 Amp draw motor provides easy start-up and reduces breaker tripping. Roll cage and control panel provide protection to key compressor components. It has low 79 dBA operational noise level for a quieter work environment. The D51236K nailer uses 1/2 inch - 1-1/4 inch 18 gauge straight collated nails and has 100 nail capacity. Nailer features overmolded no-mar pad which increases visibility and reduces marring on material. It is lightweight (30 lbs), thin (10.5 inch) and compact design and is easy to carry and store. The D51256K nailer uses 1-1/4 inch - 2-1/2 inch, 16 gauge straight collated nails and has 160 nail capacity. Nailer tool free features 360 exhaust, depth ajustment thumbwheel and jam clearing. | |
|
DeWalt D55141 Heavy-Duty 2 Gallon Trim Compressor, 150 PSI Max, 2200 RPM |
|
| The DeWalt D55141 is a Heavy-Duty 2 Gallon, 150 PSI Max Trim Compressor. The durable oil free pump provides extended maintenance-free operation and low 79 dBA allows for quieter operation. Finish woodworkers and carpenters can use the D55141 to complete custom and exterior trim, while other tradesmen will find it useful in a number of non-trim applications. For increased performance, the compressor produces 2.0 SCFM at 90 PSI, 150 PSI Max and provides users with a low noise operation at 79 dBA. It is also equipped with an oil-free pump, allowing for maintenance-free operation. The long-life pump delivers surge performance with quick recovery and the oil-free design also increases productivity by eliminating the need for users to check or refill the pump. Additionally, the oil-free pump helps to keep the jobsite clean, preventing oil from transferring to work surfaces. The motor is also equipped with a high flow regulator that delivers maximum air pressure, increasing performance on the jobsite. For increased efficiency it is equipped with the easy-to-use dual, quick couplers, allowing multiple nailer operations at the same time. The compressor also features a ball drain valve for quick and thorough tank draining and a convenient cord wrap for quick, easy storage. It is built with an innovative roll cage, full-protection frame design to shield the unit from accidental damage and routine wear and tear. The wrap-around control panel that covers the frame also provides further protection to key components of the compressor. | |
| The DeWalt D51180 Heavy-Duty Palm Nailer features a lightweight (2.65 lbs) compact design that will drive all required jobsite fasteners (6d - 16d bulk nails) with ease. The nailers full metal housing will withstand most jobsite abuse, while the leather comfort grip helps reduce vibration and prevent slipping during applications. In addition, the magnetic tip allows for easy nail placement in tight spaces. | |
| The DeWalt DCA16150 is a box of 2500 16 Gauge 20 1-1/2 2500 Count Angle Nails. These 16 gauge 20 finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process which ensures that each nail will resist rust and moisture. These 1-1/2 16 gauge 20 nails are ideal for finish work and are compatible with DeWalt cordless angled nailers. | |
Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!





















